Installing a Brick Paver Walkway or Brick Testing Machine

The usage of Bricks or Pavers to produce a walkway or outdoor patio matches a home in a way that is unequaled. In addition, installing a Brick or Paver pathway does not necessarily require a pro.

The key to setting up a Brick or Paver Walkway is to first properly prepare the location where the bricks/pavers are to be set up. In addition, string lines ought to be strung on each side of the sidewalk.
Once the area has been dug down, 3/4" gravel stone ought to be laid in and tamped down firmly. The height in between the tamped down sand and the stringline should equate to the density of the brick or paver.

Now that you have a steady base, position a 1" pipeline or journal board the length of the walkway on either side of the walkway. Then using a flatedge, e.g. a 2"x4" board, slide it over the two lengths of the pipe/ledger board. In doing this you will create a level surface location to lay the bricks/pavers.

Now place on the level sand/stone dust strips of plastic brick borders. Set up a work on both sides of the ready area. These strips will act as your walkway border and assistance to maintain the stability and shape of the pathway. You can check here get these plastic strip borders at many home enhancement stores. The strips ought to be anchored down with 12" galvinized nails. You need to sink these nails into the ground and through the strips every foot.

The key to laying the bricks/pavers is to here make sure that they interlock with each other. Always stagger surrounding rows of bricks by 1/2 of a brick to interlock them. This will once again help preserve the integrity of the walkway.

Undoubtedly bricks/pavers will require to be cut or divided when constructing the sidewalk. To really click here cut/split the brick/paver, lay it in a bed of sand and location the chisel at a 75 degree angle over the spot where you desire to break the brick. If your pathway has curves you will require to buy/rent a wetsaw.

After installing the bricks, develop the outside edges with additional sand, and after that shovel in the topsoil and pack down firmly.
Spread stone dust over the new walkway and sweep into the fractures. This will finish the interlocking of the bricks and help to get rid of any weed development.


In addition, setting up a Brick or Paver pathway does not always need a pro. The secret to setting up a Brick or Paver Walkway is to first correctly prepare the location where the bricks/pavers are to be set up. Now that you have a stable base, put a 1" pipe or ledger board the length of the walkway on either side of the pathway. These strips will act as your pathway border and help to preserve the stability and shape of the pathway. Inevitably bricks/pavers will need to be cut or split when constructing the sidewalk.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Comments on “Installing a Brick Paver Walkway or Brick Testing Machine”

Leave a Reply

Gravatar